dmesg - Western Digital WD20EARX-00P
CPU0 microcode updated early to revision 0x29, date = 2013-06-12
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-34-generic (buildd@toyol) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #47-Ubuntu SMP Fri Apr 10 18:02:58 UTC 2015 (Ubuntu 3.16.0-34.47-generic 3.16.7-ckt8)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000dce33fff] usable
BIOS-e820: [mem 0x00000000dce34000-0x00000000dceeffff] ACPI NVS
BIOS-e820: [mem 0x00000000dcef0000-0x00000000df5e8fff] usable
BIOS-e820: [mem 0x00000000df5e9000-0x00000000df61efff] reserved
BIOS-e820: [mem 0x00000000df61f000-0x00000000df639fff] usable
BIOS-e820: [mem 0x00000000df63a000-0x00000000df66efff] type 20
BIOS-e820: [mem 0x00000000df66f000-0x00000000df698fff] usable
BIOS-e820: [mem 0x00000000df699000-0x00000000df6befff] reserved
BIOS-e820: [mem 0x00000000df6bf000-0x00000000df755fff] usable
BIOS-e820: [mem 0x00000000df756000-0x00000000df7befff] ACPI NVS
BIOS-e820: [mem 0x00000000df7bf000-0x00000000df7e8fff] usable
BIOS-e820: [mem 0x00000000df7e9000-0x00000000df7f1fff] ACPI data
BIOS-e820: [mem 0x00000000df7f2000-0x00000000df7f2fff] usable
BIOS-e820: [mem 0x00000000df7f3000-0x00000000df7fefff] ACPI data
BIOS-e820: [mem 0x00000000df7ff000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ffd85000-0x00000000ffd94fff] reserved
BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f7fffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.00 by
efi: ACPI 2.0=0xdf7fd014 SMBIOS=0xdf69a000
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000000f000-0x0000000000020000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000020000-0x000000000008f000) (0MB)
efi: mem04: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem05: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014f6000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000014f6000-0x0000000002000000) (11MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033f6000) (19MB)
efi: mem09: type=7, attr=0xf, range=[0x00000000033f6000-0x0000000010000000) (204MB)
efi: mem10: type=3, attr=0xf, range=[0x0000000010000000-0x000000001000c000) (0MB)
efi: mem11: type=7, attr=0xf, range=[0x000000001000c000-0x0000000018000000) (127MB)
efi: mem12: type=3, attr=0xf, range=[0x0000000018000000-0x0000000028000000) (256MB)
efi: mem13: type=7, attr=0xf, range=[0x0000000028000000-0x0000000035688000) (214MB)
efi: mem14: type=2, attr=0xf, range=[0x0000000035688000-0x0000000036b3c000) (20MB)
efi: mem15: type=7, attr=0xf, range=[0x0000000036b3c000-0x00000000a92e3000) (1831MB)
efi: mem16: type=2, attr=0xf, range=[0x00000000a92e3000-0x00000000dc432000) (817MB)
efi: mem17: type=1, attr=0xf, range=[0x00000000dc432000-0x00000000dc555000) (1MB)
efi: mem18: type=4, attr=0xf, range=[0x00000000dc555000-0x00000000dc9d6000) (4MB)
efi: mem19: type=7, attr=0xf, range=[0x00000000dc9d6000-0x00000000dc9db000) (0MB)
efi: mem20: type=2, attr=0xf, range=[0x00000000dc9db000-0x00000000dcbaf000) (1MB)
efi: mem21: type=4, attr=0xf, range=[0x00000000dcbaf000-0x00000000dcd88000) (1MB)
efi: mem22: type=7, attr=0xf, range=[0x00000000dcd88000-0x00000000dcd8c000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x00000000dcd8c000-0x00000000dcd9f000) (0MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000dcd9f000-0x00000000dce34000) (0MB)
efi: mem25: type=10, attr=0xf, range=[0x00000000dce34000-0x00000000dcef0000) (0MB)
efi: mem26: type=4, attr=0xf, range=[0x00000000dcef0000-0x00000000dcf2a000) (0MB)
efi: mem27: type=7, attr=0xf, range=[0x00000000dcf2a000-0x00000000dcf2b000) (0MB)
efi: mem28: type=4, attr=0xf, range=[0x00000000dcf2b000-0x00000000dcf2c000) (0MB)
efi: mem29: type=7, attr=0xf, range=[0x00000000dcf2c000-0x00000000dcf2f000) (0MB)
efi: mem30: type=4, attr=0xf, range=[0x00000000dcf2f000-0x00000000dcf57000) (0MB)
efi: mem31: type=7, attr=0xf, range=[0x00000000dcf57000-0x00000000dcf5a000) (0MB)
efi: mem32: type=4, attr=0xf, range=[0x00000000dcf5a000-0x00000000dcf5b000) (0MB)
efi: mem33: type=7, attr=0xf, range=[0x00000000dcf5b000-0x00000000dcf5d000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000dcf5d000-0x00000000dcf5f000) (0MB)
efi: mem35: type=7, attr=0xf, range=[0x00000000dcf5f000-0x00000000dcf61000) (0MB)
efi: mem36: type=4, attr=0xf, range=[0x00000000dcf61000-0x00000000dcf63000) (0MB)
efi: mem37: type=7, attr=0xf, range=[0x00000000dcf63000-0x00000000dcf66000) (0MB)
efi: mem38: type=4, attr=0xf, range=[0x00000000dcf66000-0x00000000dcfe6000) (0MB)
efi: mem39: type=3, attr=0xf, range=[0x00000000dcfe6000-0x00000000dcff1000) (0MB)
efi: mem40: type=4, attr=0xf, range=[0x00000000dcff1000-0x00000000dcff3000) (0MB)
efi: mem41: type=3, attr=0xf, range=[0x00000000dcff3000-0x00000000dd012000) (0MB)
efi: mem42: type=4, attr=0xf, range=[0x00000000dd012000-0x00000000dd039000) (0MB)
efi: mem43: type=3, attr=0xf, range=[0x00000000dd039000-0x00000000dd03f000) (0MB)
efi: mem44: type=4, attr=0xf, range=[0x00000000dd03f000-0x00000000dd042000) (0MB)
efi: mem45: type=3, attr=0xf, range=[0x00000000dd042000-0x00000000dd043000) (0MB)
efi: mem46: type=4, attr=0xf, range=[0x00000000dd043000-0x00000000dd044000) (0MB)
efi: mem47: type=3, attr=0xf, range=[0x00000000dd044000-0x00000000dd045000) (0MB)
efi: mem48: type=4, attr=0xf, range=[0x00000000dd045000-0x00000000dd04b000) (0MB)
efi: mem49: type=3, attr=0xf, range=[0x00000000dd04b000-0x00000000dd063000) (0MB)
efi: mem50: type=4, attr=0xf, range=[0x00000000dd063000-0x00000000dd066000) (0MB)
efi: mem51: type=3, attr=0xf, range=[0x00000000dd066000-0x00000000dd068000) (0MB)
efi: mem52: type=4, attr=0xf, range=[0x00000000dd068000-0x00000000dd06b000) (0MB)
efi: mem53: type=3, attr=0xf, range=[0x00000000dd06b000-0x00000000dd06e000) (0MB)
efi: mem54: type=4, attr=0xf, range=[0x00000000dd06e000-0x00000000dd071000) (0MB)
efi: mem55: type=3, attr=0xf, range=[0x00000000dd071000-0x00000000dd079000) (0MB)
efi: mem56: type=4, attr=0xf, range=[0x00000000dd079000-0x00000000dd07b000) (0MB)
efi: mem57: type=3, attr=0xf, range=[0x00000000dd07b000-0x00000000dd08b000) (0MB)
efi: mem58: type=4, attr=0xf, range=[0x00000000dd08b000-0x00000000dd094000) (0MB)
efi: mem59: type=7, attr=0xf, range=[0x00000000dd094000-0x00000000dd097000) (0MB)
efi: mem60: type=4, attr=0xf, range=[0x00000000dd097000-0x00000000dd099000) (0MB)
efi: mem61: type=3, attr=0xf, range=[0x00000000dd099000-0x00000000dd09e000) (0MB)
efi: mem62: type=4, attr=0xf, range=[0x00000000dd09e000-0x00000000dd09f000) (0MB)
efi: mem63: type=3, attr=0xf, range=[0x00000000dd09f000-0x00000000dd0a2000) (0MB)
efi: mem64: type=4, attr=0xf, range=[0x00000000dd0a2000-0x00000000dd0a3000) (0MB)
efi: mem65: type=7, attr=0xf, range=[0x00000000dd0a3000-0x00000000dd0b1000) (0MB)
efi: mem66: type=4, attr=0xf, range=[0x00000000dd0b1000-0x00000000dd0e7000) (0MB)
efi: mem67: type=7, attr=0xf, range=[0x00000000dd0e7000-0x00000000dd113000) (0MB)
efi: mem68: type=4, attr=0xf, range=[0x00000000dd113000-0x00000000dd119000) (0MB)
efi: mem69: type=3, attr=0xf, range=[0x00000000dd119000-0x00000000dd12e000) (0MB)
efi: mem70: type=4, attr=0xf, range=[0x00000000dd12e000-0x00000000dd18a000) (0MB)
efi: mem71: type=7, attr=0xf, range=[0x00000000dd18a000-0x00000000dd18b000) (0MB)
efi: mem72: type=4, attr=0xf, range=[0x00000000dd18b000-0x00000000dd194000) (0MB)
efi: mem73: type=3, attr=0xf, range=[0x00000000dd194000-0x00000000dd19a000) (0MB)
efi: mem74: type=4, attr=0xf, range=[0x00000000dd19a000-0x00000000dd1c2000) (0MB)
efi: mem75: type=3, attr=0xf, range=[0x00000000dd1c2000-0x00000000dd1c9000) (0MB)
efi: mem76: type=4, attr=0xf, range=[0x00000000dd1c9000-0x00000000dd211000) (0MB)
efi: mem77: type=3, attr=0xf, range=[0x00000000dd211000-0x00000000dd23f000) (0MB)
efi: mem78: type=4, attr=0xf, range=[0x00000000dd23f000-0x00000000dd241000) (0MB)
efi: mem79: type=3, attr=0xf, range=[0x00000000dd241000-0x00000000dd242000) (0MB)
efi: mem80: type=4, attr=0xf, range=[0x00000000dd242000-0x00000000dd243000) (0MB)
efi: mem81: type=3, attr=0xf, range=[0x00000000dd243000-0x00000000dd27d000) (0MB)
efi: mem82: type=4, attr=0xf, range=[0x00000000dd27d000-0x00000000dd281000) (0MB)
efi: mem83: type=3, attr=0xf, range=[0x00000000dd281000-0x00000000dd29d000) (0MB)
efi: mem84: type=4, attr=0xf, range=[0x00000000dd29d000-0x00000000dd2a0000) (0MB)
efi: mem85: type=3, attr=0xf, range=[0x00000000dd2a0000-0x00000000dd2a1000) (0MB)
efi: mem86: type=4, attr=0xf, range=[0x00000000dd2a1000-0x00000000dd2a4000) (0MB)
efi: mem87: type=3, attr=0xf, range=[0x00000000dd2a4000-0x00000000dd2bc000) (0MB)
efi: mem88: type=4, attr=0xf, range=[0x00000000dd2bc000-0x00000000dd2bd000) (0MB)
efi: mem89: type=3, attr=0xf, range=[0x00000000dd2bd000-0x00000000dd2c1000) (0MB)
efi: mem90: type=4, attr=0xf, range=[0x00000000dd2c1000-0x00000000dd2c2000) (0MB)
efi: mem91: type=3, attr=0xf, range=[0x00000000dd2c2000-0x00000000dd2c7000) (0MB)
efi: mem92: type=4, attr=0xf, range=[0x00000000dd2c7000-0x00000000dd2c8000) (0MB)
efi: mem93: type=7, attr=0xf, range=[0x00000000dd2c8000-0x00000000dd2c9000) (0MB)
efi: mem94: type=4, attr=0xf, range=[0x00000000dd2c9000-0x00000000dd679000) (3MB)
efi: mem95: type=3, attr=0xf, range=[0x00000000dd679000-0x00000000dd682000) (0MB)
efi: mem96: type=4, attr=0xf, range=[0x00000000dd682000-0x00000000dd686000) (0MB)
efi: mem97: type=3, attr=0xf, range=[0x00000000dd686000-0x00000000dd68b000) (0MB)
efi: mem98: type=4, attr=0xf, range=[0x00000000dd68b000-0x00000000dd68d000) (0MB)
efi: mem99: type=3, attr=0xf, range=[0x00000000dd68d000-0x00000000dd68e000) (0MB)
efi: mem100: type=4, attr=0xf, range=[0x00000000dd68e000-0x00000000dd68f000) (0MB)
efi: mem101: type=3, attr=0xf, range=[0x00000000dd68f000-0x00000000dd693000) (0MB)
efi: mem102: type=4, attr=0xf, range=[0x00000000dd693000-0x00000000dd697000) (0MB)
efi: mem103: type=3, attr=0xf, range=[0x00000000dd697000-0x00000000dd69a000) (0MB)
efi: mem104: type=4, attr=0xf, range=[0x00000000dd69a000-0x00000000dd6af000) (0MB)
efi: mem105: type=3, attr=0xf, range=[0x00000000dd6af000-0x00000000dd6c4000) (0MB)
efi: mem106: type=4, attr=0xf, range=[0x00000000dd6c4000-0x00000000dd6c5000) (0MB)
efi: mem107: type=3, attr=0xf, range=[0x00000000dd6c5000-0x00000000dd6c7000) (0MB)
efi: mem108: type=4, attr=0xf, range=[0x00000000dd6c7000-0x00000000dd6cc000) (0MB)
efi: mem109: type=3, attr=0xf, range=[0x00000000dd6cc000-0x00000000dd6cf000) (0MB)
efi: mem110: type=4, attr=0xf, range=[0x00000000dd6cf000-0x00000000dd6d0000) (0MB)
efi: mem111: type=3, attr=0xf, range=[0x00000000dd6d0000-0x00000000dd6d2000) (0MB)
efi: mem112: type=4, attr=0xf, range=[0x00000000dd6d2000-0x00000000dd6d3000) (0MB)
efi: mem113: type=3, attr=0xf, range=[0x00000000dd6d3000-0x00000000dd6d4000) (0MB)
efi: mem114: type=4, attr=0xf, range=[0x00000000dd6d4000-0x00000000dd6d5000) (0MB)
efi: mem115: type=7, attr=0xf, range=[0x00000000dd6d5000-0x00000000dd6e6000) (0MB)
efi: mem116: type=4, attr=0xf, range=[0x00000000dd6e6000-0x00000000dd6e7000) (0MB)
efi: mem117: type=2, attr=0xf, range=[0x00000000dd6e7000-0x00000000dd6e9000) (0MB)
efi: mem118: type=4, attr=0xf, range=[0x00000000dd6e9000-0x00000000dd6f5000) (0MB)
efi: mem119: type=3, attr=0xf, range=[0x00000000dd6f5000-0x00000000dd703000) (0MB)
efi: mem120: type=4, attr=0xf, range=[0x00000000dd703000-0x00000000dd709000) (0MB)
efi: mem121: type=3, attr=0xf, range=[0x00000000dd709000-0x00000000dd70d000) (0MB)
efi: mem122: type=4, attr=0xf, range=[0x00000000dd70d000-0x00000000dd710000) (0MB)
efi: mem123: type=3, attr=0xf, range=[0x00000000dd710000-0x00000000dd717000) (0MB)
efi: mem124: type=4, attr=0xf, range=[0x00000000dd717000-0x00000000dd719000) (0MB)
efi: mem125: type=3, attr=0xf, range=[0x00000000dd719000-0x00000000dd71c000) (0MB)
efi: mem126: type=4, attr=0xf, range=[0x00000000dd71c000-0x00000000dd71e000) (0MB)
efi: mem127: type=3, attr=0xf, range=[0x00000000dd71e000-0x00000000dd720000) (0MB)
efi: mem128: type=4, attr=0xf, range=[0x00000000dd720000-0x00000000dd721000) (0MB)
efi: mem129: type=3, attr=0xf, range=[0x00000000dd721000-0x00000000dd72c000) (0MB)
efi: mem130: type=4, attr=0xf, range=[0x00000000dd72c000-0x00000000dd730000) (0MB)
efi: mem131: type=3, attr=0xf, range=[0x00000000dd730000-0x00000000dd731000) (0MB)
efi: mem132: type=4, attr=0xf, range=[0x00000000dd731000-0x00000000dd732000) (0MB)
efi: mem133: type=3, attr=0xf, range=[0x00000000dd732000-0x00000000dd751000) (0MB)
efi: mem134: type=4, attr=0xf, range=[0x00000000dd751000-0x00000000dd752000) (0MB)
efi: mem135: type=3, attr=0xf, range=[0x00000000dd752000-0x00000000dd76e000) (0MB)
efi: mem136: type=4, attr=0xf, range=[0x00000000dd76e000-0x00000000dd770000) (0MB)
efi: mem137: type=3, attr=0xf, range=[0x00000000dd770000-0x00000000dd771000) (0MB)
efi: mem138: type=4, attr=0xf, range=[0x00000000dd771000-0x00000000dd774000) (0MB)
efi: mem139: type=3, attr=0xf, range=[0x00000000dd774000-0x00000000dd789000) (0MB)
efi: mem140: type=4, attr=0xf, range=[0x00000000dd789000-0x00000000dd78a000) (0MB)
efi: mem141: type=3, attr=0xf, range=[0x00000000dd78a000-0x00000000dd78b000) (0MB)
efi: mem142: type=4, attr=0xf, range=[0x00000000dd78b000-0x00000000dd78c000) (0MB)
efi: mem143: type=3, attr=0xf, range=[0x00000000dd78c000-0x00000000dd790000) (0MB)
efi: mem144: type=4, attr=0xf, range=[0x00000000dd790000-0x00000000ddbb1000) (4MB)
efi: mem145: type=3, attr=0xf, range=[0x00000000ddbb1000-0x00000000ddbb9000) (0MB)
efi: mem146: type=4, attr=0xf, range=[0x00000000ddbb9000-0x00000000ddfc6000) (4MB)
efi: mem147: type=3, attr=0xf, range=[0x00000000ddfc6000-0x00000000ddfd1000) (0MB)
efi: mem148: type=4, attr=0xf, range=[0x00000000ddfd1000-0x00000000de020000) (0MB)
efi: mem149: type=3, attr=0xf, range=[0x00000000de020000-0x00000000de023000) (0MB)
efi: mem150: type=4, attr=0xf, range=[0x00000000de023000-0x00000000df5cf000) (21MB)
efi: mem151: type=7, attr=0xf, range=[0x00000000df5cf000-0x00000000df5e9000) (0MB)
efi: mem152: type=6, attr=0x800000000000000f, range=[0x00000000df5e9000-0x00000000df61f000) (0MB)
efi: mem153: type=7, attr=0xf, range=[0x00000000df61f000-0x00000000df63a000) (0MB)
efi: mem154: type=5, attr=0x800000000000000f, range=[0x00000000df63a000-0x00000000df66f000) (0MB)
efi: mem155: type=7, attr=0xf, range=[0x00000000df66f000-0x00000000df699000) (0MB)
efi: mem156: type=0, attr=0xf, range=[0x00000000df699000-0x00000000df6bf000) (0MB)
efi: mem157: type=7, attr=0xf, range=[0x00000000df6bf000-0x00000000df756000) (0MB)
efi: mem158: type=10, attr=0xf, range=[0x00000000df756000-0x00000000df7bf000) (0MB)
efi: mem159: type=7, attr=0xf, range=[0x00000000df7bf000-0x00000000df7dd000) (0MB)
efi: mem160: type=2, attr=0xf, range=[0x00000000df7dd000-0x00000000df7e9000) (0MB)
efi: mem161: type=9, attr=0xf, range=[0x00000000df7e9000-0x00000000df7f2000) (0MB)
efi: mem162: type=7, attr=0xf, range=[0x00000000df7f2000-0x00000000df7f3000) (0MB)
efi: mem163: type=9, attr=0xf, range=[0x00000000df7f3000-0x00000000df7ff000) (0MB)
efi: mem164: type=4, attr=0xf, range=[0x00000000df7ff000-0x00000000df800000) (0MB)
efi: mem165: type=7, attr=0xf, range=[0x0000000100000000-0x000000041f800000) (12792MB)
efi: mem166: type=0, attr=0x8000000000000000, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
efi: mem167: type=0, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem168: type=0, attr=0x8000000000000000, range=[0x00000000ffd85000-0x00000000ffd95000) (0MB)
efi: mem169: type=0, attr=0x8000000000000000, range=[0x00000000fffff000-0x0000000100000000) (0MB)
SMBIOS 2.6 present.
DMI: /DP67BG, BIOS BGP6710J.86A.2209.2012.0717.2302 07/17/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x41f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0FFC00000 mask FFFC00000 write-protect
4 base 100000000 mask F00000000 write-back
5 base 200000000 mask E00000000 write-back
6 base 400000000 mask E00000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fd2000, 0x02fd2fff] PGTABLE
BRK [0x02fd3000, 0x02fd3fff] PGTABLE
BRK [0x02fd4000, 0x02fd4fff] PGTABLE
init_memory_mapping: [mem 0x41f600000-0x41f7fffff]
[mem 0x41f600000-0x41f7fffff] page 2M
BRK [0x02fd5000, 0x02fd5fff] PGTABLE
init_memory_mapping: [mem 0x41c000000-0x41f5fffff]
[mem 0x41c000000-0x41f5fffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41bffffff]
[mem 0x400000000-0x41bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdce33fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdcdfffff] page 2M
[mem 0xdce00000-0xdce33fff] page 4k
init_memory_mapping: [mem 0xdcef0000-0xdf5e8fff]
[mem 0xdcef0000-0xdcffffff] page 4k
[mem 0xdd000000-0xdf3fffff] page 2M
[mem 0xdf400000-0xdf5e8fff] page 4k
BRK [0x02fd6000, 0x02fd6fff] PGTABLE
init_memory_mapping: [mem 0xdf61f000-0xdf639fff]
[mem 0xdf61f000-0xdf639fff] page 4k
BRK [0x02fd7000, 0x02fd7fff] PGTABLE
init_memory_mapping: [mem 0xdf66f000-0xdf698fff]
[mem 0xdf66f000-0xdf698fff] page 4k
init_memory_mapping: [mem 0xdf6bf000-0xdf755fff]
[mem 0xdf6bf000-0xdf755fff] page 4k
init_memory_mapping: [mem 0xdf7bf000-0xdf7e8fff]
[mem 0xdf7bf000-0xdf7e8fff] page 4k
init_memory_mapping: [mem 0xdf7f2000-0xdf7f2fff]
[mem 0xdf7f2000-0xdf7f2fff] page 4k
init_memory_mapping: [mem 0xdf7ff000-0xdf7fffff]
[mem 0xdf7ff000-0xdf7fffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x35688000-0x36b3bfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DF7FD014 000024 (v02 INTEL )
ACPI: XSDT 0x00000000DF7FD120 00005C (v01 INTEL BGP6710J 000008A1 01000013)
ACPI: FACP 0x00000000DF7FC000 0000F4 (v03 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20140424/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20140424/tbfadt-699)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20140424/tbfadt-699)
ACPI: DSDT 0x00000000DF7F8000 00386B (v02 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI: FACS 0x00000000DF76B000 000040
ACPI: APIC 0x00000000DF7F7000 0000BC (v02 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI: MCFG 0x00000000DF7F6000 00003C (v01 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI: ASF! 0x00000000DF7F5000 0000A5 (v32 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI: HPET 0x00000000DF7F4000 000038 (v01 INTEL BGP6710J 000008A1 MSFT 0100000D)
ACPI: SSDT 0x00000000DF7EA000 0078CC (v01 INTEL SSDT PM 000008A1 MSFT 0100000D)
ACPI: ASPT 0x00000000DF7F3000 000034 (v07 INTEL PerfTune 000008A1 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f7fffff]
Initmem setup node 0 [mem 0x00000000-0x41f7fffff]
NODE_DATA [mem 0x41f7eb000-0x41f7effff]
[ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ee00000-ffff88041edfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x41f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0xdce33fff]
node 0: [mem 0xdcef0000-0xdf5e8fff]
node 0: [mem 0xdf61f000-0xdf639fff]
node 0: [mem 0xdf66f000-0xdf698fff]
node 0: [mem 0xdf6bf000-0xdf755fff]
node 0: [mem 0xdf7bf000-0xdf7e8fff]
node 0: [mem 0xdf7f2000-0xdf7f2fff]
node 0: [mem 0xdf7ff000-0xdf7fffff]
node 0: [mem 0x100000000-0x41f7fffff]
On node 0 totalpages: 4189651
DMA zone: 64 pages used for memmap
DMA zone: 41 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14233 pages used for memmap
DMA32 zone: 910901 pages, LIFO batch:31
Normal zone: 51168 pages used for memmap
Normal zone: 3274752 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdce34000-0xdceeffff]
PM: Registered nosave memory: [mem 0xdf5e9000-0xdf61efff]
PM: Registered nosave memory: [mem 0xdf63a000-0xdf66efff]
PM: Registered nosave memory: [mem 0xdf699000-0xdf6befff]
PM: Registered nosave memory: [mem 0xdf756000-0xdf7befff]
PM: Registered nosave memory: [mem 0xdf7e9000-0xdf7f1fff]
PM: Registered nosave memory: [mem 0xdf7f3000-0xdf7fefff]
PM: Registered nosave memory: [mem 0xdf800000-0xf80f7fff]
PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffd84fff]
PM: Registered nosave memory: [mem 0xffd85000-0xffd94fff]
PM: Registered nosave memory: [mem 0xffd95000-0xffffefff]
PM: Registered nosave memory: [mem 0xfffff000-0xffffffff]
e820: [mem 0xdf800000-0xf80f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88041f400000 s82432 r8192 d24064 u262144
pcpu-alloc: s82432 r8192 d24064 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4124145
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16083388K/16758604K available (7748K kernel code, 1197K rwdata, 3612K rodata, 1360K init, 1308K bss, 675216K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:744 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.279 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.55 BogoMIPS (lpj=13569116)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
ftrace: allocating 29331 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0x29, date = 2013-06-12
#3
#4
CPU4 microcode updated early to revision 0x29, date = 2013-06-12
#5
#6
CPU6 microcode updated early to revision 0x29, date = 2013-06-12
#7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54276.46 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xdce34000-0xdceeffff] (770048 bytes)
PM: Registering ACPI NVS region [mem 0xdf756000-0xdf7befff] (430080 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:00:36, date: 04/18/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[Firmware Info]: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf3527100-0xf352710f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf3500000-0xf351ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf3525000-0xf3525fff]
pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf3526c00-0xf3526fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf3520000-0xf3523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf3526800-0xf3526bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4068-0x406f]
pci 0000:00:1f.2: reg 0x14: [io 0x4074-0x4077]
pci 0000:00:1f.2: reg 0x18: [io 0x4060-0x4067]
pci 0000:00:1f.2: reg 0x1c: [io 0x4070-0x4073]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf3526000-0xf35267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf3527000-0xf35270ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [10de:100a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf3000000-0xf3003fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xf3400000-0xf3401fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff]
pci 0000:04:00.0: [10e3:8113] type 01 class 0x060401
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf3300000-0xf33fffff]
pci 0000:05:01.0: [9004:5078] type 00 class 0x010000
pci 0000:05:01.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:05:01.0: reg 0x14: [mem 0xf3304000-0xf3304fff]
pci 0000:05:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:05:03.0: reg 0x10: [mem 0xf3305000-0xf33057ff]
pci 0000:05:03.0: reg 0x14: [mem 0xf3300000-0xf3303fff]
pci 0000:05:03.0: supports D1 D2
pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:04:00.0: bridge window [mem 0xf3300000-0xf33fffff]
pci 0000:04:00.0: bridge window [io 0x2000-0x2fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xf3300000-0xf33fffff] (subtractive decode)
pci 0000:06:00.0: [1106:3432] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xf3200000-0xf3200fff]
pci 0000:06:00.0: PME# supported from D0 D3hot
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf3200000-0xf32fffff]
pci 0000:07:00.0: [11ab:6121] type 00 class 0x01018f
pci 0000:07:00.0: reg 0x10: [io 0x1018-0x101f]
pci 0000:07:00.0: reg 0x14: [io 0x1024-0x1027]
pci 0000:07:00.0: reg 0x18: [io 0x1010-0x1017]
pci 0000:07:00.0: reg 0x1c: [io 0x1020-0x1023]
pci 0000:07:00.0: reg 0x20: [io 0x1000-0x100f]
pci 0000:07:00.0: reg 0x24: [mem 0xf3100000-0xf31003ff]
pci 0000:07:00.0: supports D1
pci 0000:07:00.0: PME# supported from D0 D1 D3hot
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.7: bridge window [mem 0xf3100000-0xf31fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0xdce34000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf5e9000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf63a000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf699000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf756000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf7e9000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf7f3000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f800000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xf8000000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io 0x0500-0x057f] has been reserved
system 00:03: [io 0x0400-0x0453] could not be reserved
system 00:03: [io 0x0458-0x047f] has been reserved
system 00:03: [io 0x0680-0x06ff] has been reserved
system 00:03: [io 0x0290-0x02af] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xf3080000-0xf30fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf30fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf34fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:04:00.0: bridge window [mem 0xf3300000-0xf33fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf3300000-0xf33fffff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [mem 0xf3200000-0xf32fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.7: bridge window [mem 0xf3100000-0xf31fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf30fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf3400000-0xf34fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xf3300000-0xf33fffff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf3300000-0xf33fffff]
pci_bus 0000:05: resource 4 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 5 [mem 0xf3300000-0xf33fffff]
pci_bus 0000:06: resource 1 [mem 0xf3200000-0xf32fffff]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xf3100000-0xf31fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21200K (ffff880035688000 - ffff880036b3c000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd8555000-0xdc555000] (64MB) mapped at [ffff8800d8555000-ffff8800dc554fff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x29
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1429365636.492:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 32056
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, mapped to 0xffffc90001c00000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3526c00
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-34-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3526800
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-34-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-34-generic xhci_hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-34-generic xhci_hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-34-generic xhci_hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-34-generic xhci_hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 720f95eab0ea3a33b3bedee1ee3ae788f51cae26'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:784:30
rtc_cmos 00:01: setting system clock to 2015-04-18 14:00:36 UTC (1429365636)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1360K (ffffffff81d2d000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 432K (ffff880002794000 - ffff880002800000)
Freeing unused kernel memory: 484K (ffff880002b87000 - ffff880002c00000)
systemd-udevd[147]: starting version 208
random: systemd-udevd urandom read with 1 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
ahc_pci:5:1:0: Host Adapter Bios disabled. Using default SCSI device parameters
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:4f:ba:5b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 50 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526100 irq 50
ata2: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526180 irq 50
ata3: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526200 irq 50
ata4: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526280 irq 50
ata5: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526300 irq 50
ata6: SATA max UDMA/133 abar m2048@0xf3526000 port 0xf3526380 irq 50
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST95005620AS, SD25, max UDMA/133
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.13, max UDMA/100
ata5.00: configured for UDMA/100
ata6.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
ata6.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata1.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata3.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7
ata3.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1109 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 4:0:0:0: Direct-Access ATA ST95005620AS SD25 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.13 PQ: 0 ANSI: 5
sdd: sdd1 sdd2 < sdd5 > sdd3 sdd4
sd 4:0:0:0: [sdd] Attached SCSI disk
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg4 type 5
scsi 6:0:0:0: Direct-Access ATA Maxtor 6L300S0 1G10 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 586114704 512-byte logical blocks: (300 GB/279 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 5-1: new high-speed USB device number 2 using xhci_hcd
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI disk
usb 5-1: New USB device found, idVendor=2109, idProduct=0811
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3392.293 MHz
usb 1-1.5: new full-speed USB device number 3 using ehci-pci
usb 1-1.5: New USB device found, idVendor=1b1c, idProduct=1b30
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Corsair Vengeance M60 Mouse
usb 1-1.5: Manufacturer: Corsair
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:1B1C:1B30.0001/input/input5
hid-generic 0003:1B1C:1B30.0001: input,hidraw0: USB HID v1.11 Mouse [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1a.0-1.5/input0
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:1B1C:1B30.0002/input/input6
hid-generic 0003:1B1C:1B30.0002: input,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1a.0-1.5/input1
input: Corsair Corsair Vengeance M60 Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.2/0003:1B1C:1B30.0003/input/input7
hid-generic 0003:1B1C:1B30.0003: input,hidraw2: USB HID v1.11 Device [Corsair Corsair Vengeance M60 Mouse] on usb-0000:00:1a.0-1.5/input2
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
usb 1-1.6: new high-speed USB device number 4 using ehci-pci
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi7 : pata_marvell
scsi8 : pata_marvell
ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 19
ata8: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 19
usb 1-1.6: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6:1.0: USB hub found
hub 1-1.6:1.0: 4 ports detected
random: nonblocking pool is initialized
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
usb 2-1.3: New USB device found, idVendor=0db0, idProduct=3871
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: 802.11 n WLAN
usb 2-1.3: Manufacturer: Ralink
usb 2-1.3: SerialNumber: 1.0
usb 2-1.4: new full-speed USB device number 4 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0db0, idProduct=a871
usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1.7: new low-speed USB device number 5 using ehci-pci
usb 2-1.7: New USB device found, idVendor=046d, idProduct=c20a
usb 2-1.7: New USB device strings: Mfr=4, Product=32, SerialNumber=0
usb 2-1.7: Product: WingMan RumblePad
usb 2-1.7: Manufacturer: Logitech Inc.
Switched to clocksource tsc
usb 1-1.6.2: new full-speed USB device number 5 using ehci-pci
usb 1-1.6.2: New USB device found, idVendor=1b1c, idProduct=1b02
usb 1-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6.2: Product: Corsair Vengeance K90 Keyboard
usb 1-1.6.2: Manufacturer: Corsair
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.0/0003:1B1C:1B02.0005/input/input8
hid-generic 0003:1B1C:1B02.0005: input,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:1a.0-1.6.2/input0
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.1/0003:1B1C:1B02.0006/input/input9
hid-generic 0003:1B1C:1B02.0006: input,hidraw4: USB HID v1.11 Device [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:1a.0-1.6.2/input1
input: Corsair Corsair Vengeance K90 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.2/1-1.6.2:1.2/0003:1B1C:1B02.0007/input/input10
hid-generic 0003:1B1C:1B02.0007: input,hidraw5: USB HID v1.11 Keyboard [Corsair Corsair Vengeance K90 Keyboard] on usb-0000:00:1a.0-1.6.2/input2
usb 1-1.6.3: new high-speed USB device number 6 using ehci-pci
usb 1-1.6.3: New USB device found, idVendor=03f0, idProduct=b116
usb 1-1.6.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.6.3: Product: CNF8215
usb 1-1.6.3: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-1.6.3: SerialNumber: SN0001
usb 1-1.6.4: new high-speed USB device number 7 using ehci-pci
usb 1-1.6.4: New USB device found, idVendor=0409, idProduct=005a
usb 1-1.6.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.6.4:1.0: USB hub found
hub 1-1.6.4:1.0: 2 ports detected
usb 1-1.6.4.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.6.4.1: New USB device found, idVendor=2304, idProduct=0237
usb 1-1.6.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6.4.1: Product: PCTV 73e
usb 1-1.6.4.1: Manufacturer: Pinnacle
usb 1-1.6.4.1: SerialNumber: 0000000M32M0RB5
usb 1-1.6.4.2: new high-speed USB device number 9 using ehci-pci
usb 1-1.6.4.2: New USB device found, idVendor=03f0, idProduct=3724
usb 1-1.6.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6.4.2: Product: Digital Picture Frame
usb 1-1.6.4.2: Manufacturer: Hewlett-Packard
usb 1-1.6.4.2: SerialNumber: 06PD890900001
usb-storage 1-1.6.4.2:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-1.6.4.2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 9:0:0:0: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
scsi 9:0:0:1: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
scsi 9:0:0:2: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg6 type 0
sd 9:0:0:1: Attached scsi generic sg7 type 0
sd 9:0:0:2: Attached scsi generic sg8 type 0
sd 9:0:0:0: [sdf] Attached SCSI removable disk
sd 9:0:0:1: [sdg] Attached SCSI removable disk
sd 9:0:0:2: [sdh] Attached SCSI removable disk
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
firewire_core 0000:05:03.0: created device fw0: GUID 00224dffff4e4d0a, S400
logitech 0003:046D:C20A.0004: timeout initializing reports
input: Logitech Inc. WingMan RumblePad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C20A.0004/input/input11
logitech 0003:046D:C20A.0004: input,hidraw6: USB HID v1.10 Joystick [Logitech Inc. WingMan RumblePad] on usb-0000:00:1d.0-1.7/input0
logitech 0003:046D:C20A.0004: Force feedback for Logitech variant 2 rumble devices by Anssi Hannula
PM: Marking nosave pages: [mem 0x0008f000-0x0008ffff]
PM: Marking nosave pages: [mem 0x000a0000-0x000fffff]
PM: Marking nosave pages: [mem 0xdce34000-0xdceeffff]
PM: Marking nosave pages: [mem 0xdf5e9000-0xdf61efff]
PM: Marking nosave pages: [mem 0xdf63a000-0xdf66efff]
PM: Marking nosave pages: [mem 0xdf699000-0xdf6befff]
PM: Marking nosave pages: [mem 0xdf756000-0xdf7befff]
PM: Marking nosave pages: [mem 0xdf7e9000-0xdf7f1fff]
PM: Marking nosave pages: [mem 0xdf7f3000-0xdf7fefff]
PM: Marking nosave pages: [mem 0xdf800000-0xffffffff]
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sdd4): mounted filesystem with ordered data mode. Opts: (null)
Adding 16757756k swap on /dev/sdd5. Priority:-1 extents:1 across:16757756k FS
EXT4-fs (sdd4): re-mounted. Opts: errors=remount-ro
systemd-udevd[496]: starting version 208
w83627ehf: Found NCT6775F chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_SB_.PTMD.HWM1) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
mei_me 0000:00:16.0: irq 51 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x000000000000050c-0x000000000000050f (\IGPO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lp: driver loaded but no devices found
AVX version of gcm_enc/dec engaged.
ppdev: user-space parallel port driver
snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
w83627ehf: Found NCT6775F chip at 0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_SB_.PTMD.HWM1) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: dig-out=0x11/0x1e
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Front Mic=0x19
sound hdaudioC0D2: Rear Mic=0x18
sound hdaudioC0D2: Line=0x1a
device-mapper: multipath: version 1.7.0 loaded
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
gpio_ich: GPIO from 180 to 255 on gpio_ich
usbcore: registered new interface driver btusb
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1429365657.511:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=952 comm="apparmor_parser"
audit: type=1400 audit(1429365657.511:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=951 comm="apparmor_parser"
init: failsafe main process (1079) killed by TERM signal
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
audit: type=1400 audit(1429365657.963:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1232 comm="apparmor_parser"
audit: type=1400 audit(1429365657.963:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1232 comm="apparmor_parser"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 349.16 Wed Apr 8 00:17:22 PDT 2015
init: bluetooth-touch main process (1264) terminated with status 127
init: cups main process (1309) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
dvb-usb: found a 'Pinnacle PCTV 73e' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Pinnacle PCTV 73e)
usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
usb 1-1.6.4.1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
init: samba-ad-dc main process (1470) terminated with status 1
systemd-logind[1669]: New seat seat0.
systemd-logind[1669]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[1669]: Watching system buttons on /dev/input/event0 (Sleep Button)
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4.1/rc/rc0/input23
rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.4/1-1.6.4.1/rc/rc0
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Pinnacle PCTV 73e successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
WARNING! power/level is deprecated; use power/control instead
media: Linux media interface: v0.10
Linux video capture interface: v2.00
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device CNF8215 (03f0:b116)
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
input: CNF8215 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x14d offMax=0x2365
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.18_Ubuntu (interface 0x001a0008).
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
nvidia 0000:01:00.0: irq 53 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia_uvm: Loaded the UVM driver, major device number 246
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2751) killed by TERM signal
systemd-logind[1669]: Failed to start unit user@116.service: Unknown unit: user@116.service
systemd-logind[1669]: Failed to start user service: Unknown unit: user@116.service
systemd-logind[1669]: New session c1 of user gdm.
systemd-logind[1669]: Linked /tmp/.X11-unix/X0 to /run/user/116/X11-display.
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
audit_printk_skb: 75 callbacks suppressed
audit: type=1400 audit(1429365665.310:37): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/dconf/profile/gdm" pid=3499 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=116 ouid=0
wlan0: authenticate with 4c:72:b9:2a:04:ec
wlan0: direct probe to 4c:72:b9:2a:04:ec (try 1/3)
wlan0: send auth to 4c:72:b9:2a:04:ec (try 2/3)
wlan0: authenticated
wlan0: associate with 4c:72:b9:2a:04:ec (try 1/3)
wlan0: RX AssocResp from 4c:72:b9:2a:04:ec (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit: type=1400 audit(1429365688.478:38): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3683 comm="apparmor_parser"
audit: type=1400 audit(1429365688.478:39): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3683 comm="apparmor_parser"
audit: type=1400 audit(1429365688.510:40): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=3683 comm="apparmor_parser"
systemd-logind[1669]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
systemd-logind[1669]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[1669]: New session c2 of user oscar.
systemd-logind[1669]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.4.2: USB disconnect, device number 9
usb 1-1.6.3: USB disconnect, device number 6
perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-1.6.3: new high-speed USB device number 10 using ehci-pci
usb 1-1.6.3: New USB device found, idVendor=03f0, idProduct=b116
usb 1-1.6.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-1.6.3: Product: CNF8215
usb 1-1.6.3: Manufacturer: Chicony Electronics Co., Ltd.
usb 1-1.6.3: SerialNumber: SN0001
uvcvideo: Found UVC 1.00 device CNF8215 (03f0:b116)
input: CNF8215 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6.3/1-1.6.3:1.0/input/input25
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.4.2: new high-speed USB device number 11 using ehci-pci
usb 1-1.6.4.2: New USB device found, idVendor=03f0, idProduct=3724
usb 1-1.6.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6.4.2: Product: Digital Picture Frame
usb 1-1.6.4.2: Manufacturer: Hewlett-Packard
usb 1-1.6.4.2: SerialNumber: 06PD890900001
usb-storage 1-1.6.4.2:1.0: USB Mass Storage device detected
scsi10 : usb-storage 1-1.6.4.2:1.0
scsi 10:0:0:0: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
scsi 10:0:0:2: Direct-Access HP DPF 0001 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:1: Attached scsi generic sg7 type 0
sd 10:0:0:2: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdf] Attached SCSI removable disk
sd 10:0:0:1: [sdg] Attached SCSI removable disk
sd 10:0:0:2: [sdh] Attached SCSI removable disk
snd_hda_intel 0000:00:1b.0: Unstable LPIB (64960 >= 8192); disabling LPIB delay counting
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
usb 1-1.6.3: 3:1: cannot get freq at ep 0x84
wlan0: deauthenticating from 4c:72:b9:2a:04:ec by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 4c:72:b9:2a:04:ec
wlan0: direct probe to 4c:72:b9:2a:04:ec (try 1/3)
wlan0: send auth to 4c:72:b9:2a:04:ec (try 2/3)
wlan0: authenticated
wlan0: associate with 4c:72:b9:2a:04:ec (try 1/3)
wlan0: RX AssocResp from 4c:72:b9:2a:04:ec (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready